HESSI Data Object Parameters:  VIS_WV Algorithm Parameters

 

Links to other parameter tables:
     All      Spectrum (Standard, Info, All)      Lightcurve (Standard, Info, All)     
     Image:     General (Standard, Info, All),   Clean,   EM,   Forward Fit (ff),   MEM_GE (ge),   MEM_NJIT (nj),   Pixon,   UV_SMOOTH (uv),   VIS_CS,   VIS_FWDFIT (vf),   VIS_WV  
Spectral Response Matrix          Observing Summary          Simulation

 

Name Main Object Control / Info* Description Default Units Range Type** User Level*** Class
vis_wv_autolam Image Control VIS_WV Alg: If set, enables auto estimation of the regularization parameter 1 -- 0 - 1 int Expert hsi_vis_wv
vis_wv_det_index_mask_used Image Info VIS_WV Alg: Byte array showing which detectors were used to construct average used for normalization -- -- -- byte(9) N/A hsi_image_alg
vis_wv_lam Image Control VIS_WV Alg: Fixed value for the regularization parameter if vis_wv_autolam=0 0.05 -- -- float Expert hsi_vis_wv
vis_wv_n_event_used Image Info VIS_WV Alg: Total counts in each detector used to make image -- -- -- long(9) N/A hsi_image_alg
vis_wv_niter Image Control VIS_WV Alg: Max number of iterations 200 -- -- int Expert hsi_vis_wv
vis_wv_nscales Image Control VIS_WV Alg: Number of scales that will be used in the wavelet decomposition 3 -- -- int Expert hsi_vis_wv
vis_wv_profile_coeff Image Info VIS_WV Alg: Profile comparison const, slope, correlation of fit of exp. to obs. profile -- -- -- float(3,9) N/A hsi_image_alg
vis_wv_profile_cstat Image Info VIS_WV Alg: Profile comparison goodness of fit of image for each detector -- -- -- float(9) N/A hsi_image_alg
vis_wv_profile_mc_cstat Image Info VIS_WV Alg: Profile comparison monte carlo cstat for each det -- -- -- float(9) N/A hsi_image_alg
vis_wv_profile_mc_fwhm Image Info VIS_WV Alg: Profile comparison monte carlo fwhm for each det -- -- -- float(9) N/A hsi_image_alg
vis_wv_profile_mc_tot_cstat Image Info VIS_WV Alg: Profile comparison monte carlo cstat for all dets -- -- -- float N/A hsi_image_alg
vis_wv_profile_mc_tot_fwhm Image Info VIS_WV Alg: Profile comparison monte carlo fwhm for all dets -- -- -- float N/A hsi_image_alg
vis_wv_profile_tot_cstat Image Info VIS_WV Alg: Profile comparison overall goodness of fit of image -- -- -- float N/A hsi_image_alg
vis_wv_silent Image Control VIS_WV Alg: If not set, the actual min of objective function at each iter is printed 0 -- -- int Standard hsi_vis_wv
vis_wv_viscomp_chisq_alldet Image Info VIS_WV Alg: Visibility comparison reduced chisq for all detectors -- -- -- float N/A hsi_image_alg
vis_wv_viscomp_chisq_detsep Image Info VIS_WV Alg: Visibility comparison reduced chisq for each detector separately -- -- -- float(9) N/A hsi_image_alg
vis_wv_viscomp_chisq_detused Image Info VIS_WV Alg: Visibility comparison reduced chisq for all detectors used in image -- -- -- float N/A hsi_image_alg

* Control Parameters are set by the user to control the software; Info parameters are informational output parameters.

** Note that for parameters whose type is 'pointer', you can set the parameter without making it a pointer first - the object will take care of that.  And when you retrieve a parameter that is a pointer, unless you use the /NO_DEREFERENCE keyword on the call to GET, the contents of the pointer will be returned, not the pointer.

*** User Levels are:
   Standard - parameters that most users will want to set
   Advanced - parameters that require a high level of familiarity with the software
   Expert - parameters that should never be set by users

Last updated 21-Dec-2020 by Kim Tolbert , 301-286-3965